chamberlain garage door remote keypad programming

How to Program Your Garage Door Remote Keypad

Are you having trouble programming your garage door remote keypad? Look no further! In this article, we will walk you through the step-by-step process of programming your LiftMaster motor and other compatible devices.

First, let's identify which type of opener you have. If it was manufactured from 2013 to present, you likely have a Sommer opener. For those with Xtreme Garage openers made between 2016 and present, this guide will also be applicable. Additionally, Wayne Dalton openers from 1999 onwards, Chamberlain, Sears Craftsman, LiftMaster, and Master Mechanic openers from 2011 to present (with the Yellow 'Learn' button), Stanley garage door openers from 1998 onwards, Genie Intellicode and Overhead Door openers from 1995 to present, and finally, Chamberlain, Sears Craftsman, LiftMaster, Master Mechanic, and Do It openers from 2005 to present (with the Purple 'Learn' button), will also be covered.

To begin, locate the light cover on your LiftMaster motor. Unscrew or unclip it to reveal the color of the 'Learn' button and the manufacturing date. Your unit code information is usually found under this cover.

Mount Garage Doors Inc would like to note that they accept no liability for the content provided in these pages or any consequences resulting from actions taken based on this information.

Once you have identified your opener type, follow these steps:

1. Unscrew or unclip the light cover on your LiftMaster motor and look at the color of the 'Learn' button and the manufacturing date.

2. Release the 'Learn' button when the garage door opener lights blink.

3. Within 30 seconds, enter a four-digit code of your choice on the keyless entry.

4. The learn indicator light will glow steadily for 30 seconds.

If you do not have any installed light bulbs, you may hear two clicks instead of the usual beeping noise.

5. Press and release the 'Learn' button on your garage door opener.

6. If there are no light bulbs installed, you will again hear two clicks.

7. Release the button when the motor unit light blinks.

8. Within 30 seconds, press and hold the button on your hand-held remote.

9. The learn indicator light will glow steadily for 30 seconds.

Some older models may require a slightly different process:

1. Press and release the 'Learn or Smart' button on the back of your garage door opener.

2. If you do not have any installed light bulbs, you may hear two clicks instead of the usual beeping noise.

For those with Chamberlain, Sears Craftsman, LiftMaster, Master Mechanic, and Do It openers manufactured from 1993 to 1996 (with the Green 'Learn' button), or between 2005 and present (with the Purple 'Learn' button), follow a similar process, taking note of the color of the 'Learn' button and manufacturing date.

Remember to always follow the manufacturer's instructions for specific programming requirements. With these steps, you should be able to successfully program your garage door remote keypad and enjoy hassle-free access to your home.

Chamberlain garage door remote keypad programming